All ACCPAC programs version 5.0 and above come with the System Manager (SM) and this or WSM must be used to load (install) and start the various programs.
The Windowing System Manager (WSM) is an extension of the System Manager.
Be at the DOS prompt on the drive you wish to install it and then with the disk marked 'System I' in drive A, type a:install.
If you are installing on a drive other than the DOS start-up drive you must change the config.sys file to include the line files = 250 and change the autoexec.bat file to Include the line c:\dos\share.exe /L:250 /F:10000. Replace c: with your start-up drive If different.
By typing plus or plus g (this would start the general ledger if this was the only item on the start list which begins with a 'g'. On a network must use WSM and each user can have their own unique start list, printer configuration, and option list. Generally these keys can be used within the WSM: directional arrows, PageUp, PageDown, Home, End, or first character of each menu function.
On the left is the Start list which shows all of the applications already set up. On the right of the WSM only is the Active list which shows the applications already started. See bottom of screen for how to: add, modify , delete, or exit.
If possible, highlight an application that is already on the Start List and Is in the same directory you want to add the new one to, then hit insert . Each start name must be unique but it's best to have first character unique so that you can call it up by that. Scroll to the correct program and then accept the defaults for the rest of the information. If the directory is not shown, scroll to 'root' and hit enter then scroll again. To create a .new directory simply type it in. Don't use these extensions: COM, EXE, LD4, LD5, LOD, BAT, CMD.
Call up the SM any one of four ways from within the WSM: F3, Alt&F10 ; / (if using the slash command option); Ctrl&first letter of any SM menu choice For example Ctrl&L will list all ACCPAC and Companion Product programs already installed thru that WSM.
This is 40 characters such as 'Load cheques before proceeding' I Initialization file - toggle Yes/No. Needed for postscript printers, or to print forms at the same time as you print the data. Can also point to a file which gives page header to report on network printer.
WSM can support up to 10 printer configurations. Once a printer is set up, it can be attached to any menu that prints reports. Go to that menu; hit F3 ; P ; P ; you will then see a triangle to the left of the printer attached to that report. If you don't see the triangle, go one menu choice closer to printing the report and repeat the above. To change, point to the new printer and hit enter' at which time the triangle will show to the left of the newly selected printer.
6 Choices Including 'run automacros' - toggle yes/no.
Will show ACCPAC workstations and/or last database conflict.
Can go to DOS prompt - 'exit' returns to WSM. Don't use these DOS commands thru the WSM:
Append, Assign, Chkdsk with /F option, Graphics, Join, Mode, Print.
All items on the start list or only one. Do at least after every weekly back-up.
All ACCPAC and Companion Products must be installed thru this menu selection.
Install in this order: GL, AR, IC, OE, SA, AP, JC etc.
Lists version numbers for all ACCPAC and Companion Product programs already installed.
Advertising from Computer Associates.
To activate - at DOS level on drive where WSM Is installed, put WSM System I disk in drive A and type A:systempw 'password', Replace 'password' with your own unique password. Use this procedure also to reset the system password if you have forgotten the old one.
To deactivate - as above and type A:deletepw
To delete password files from data directories - as above and type A:deletepw C:\Data\*.* for all data bases in that directory or A:deletepw C:\Date\gl*.sam for only a single data base. You will not be able to remove a directory until all the hidden password files have been deleted from it.
To initially set passwords for each database start the database from the WSM start list enter the system password when prompted. when at the main menu call up the SM security menu.
Use passwords with data toggle Yes (by hitting return)
Define program password 3 levels - change periodically.
Assign menu access password - set entire menu or any Individual menu choice.
Change system password - do, this periodically.
To subsequently change security on a database if you are starting the database from the WSM follow the same instructions as 'To initially set passwords' if the database is already started, call up the SM security menu.
Set password access level - must show 'system ' otherwise you cannot access any of the other functions shown. Change by entering the system password then follow the above instructions.
Each database started from the WSM is viewed through a window.
You can have a number of windows open at the same time including more than one copy of the same database.
Windows can be sized and placed anywhere on the screen. F9 toggles the window between the size you have made it and full screen size.
To switch between windows, use F4 back to the start list, F10 next open window, Ctrl&F10 previous open window.
I.O.S. Consulting Group Inc., 7774 Wansford Drive, Delta, BC, V4C 7S9 (604) 878-0467